Pallet Racking in Redlands, CA: Buying, Installing & Permitting
Businesses searching for pallet racking in Redlands are often operating
distribution, logistics, light manufacturing, or cold storage facilities
serving the eastern Inland Empire. As warehouse development continues in the region,
properly designed pallet racking is essential for safety, efficiency, and code compliance.
Buying Pallet Racking in Redlands
Choosing the right pallet racking system in Redlands begins with understanding
pallet weights, SKU velocity, forklift type, and available clear height.
Because Redlands enforces the California Building Code and seismic requirements,
racking systems must be engineered for seismic performance from the outset.
Common pallet racking systems used in Redlands warehouses
- Selective pallet racking – the most common option for mixed-SKU operations
- Double-deep pallet racking – higher density with reduced selectivity
- Drive-in / drive-thru racking – maximum density for bulk pallet storage
- Push-back racking – high-density storage with fewer aisles
- Pallet flow racking – FIFO rotation for high-throughput facilities
- Cantilever racking – ideal for long or oversized materials
Plan layout and load capacity before purchasing
Inland Empire warehouses often operate near maximum height and weight limits.
Before purchasing racking, confirm load capacity, aisle widths, and forklift clearances:
- Warehouse Racking Calculators
- Pallet Rack Beam Capacity Estimator
- Pallet Racking Installation Cost Calculator
Installing Pallet Racking in Redlands
In Redlands, pallet racking is considered a fixed structural system and must be installed
according to manufacturer specifications and the California Building Code.
Professional installation is essential for seismic compliance, worker safety,
and passing final inspections.
What a compliant pallet rack installation includes
- Verification of slab thickness, flatness, and anchor suitability
- Proper anchoring and base plate installation
- Plumb and level rack frames with engaged beam safety locks
- Seismic bracing, row spacers, and code-compliant aisle spacing
- Rack protection such as column guards and end-of-aisle barriers
- Load capacity signage installed before final inspection
Permitting Pallet Racking in Redlands, CA
Most new pallet racking installations, expansions, or major reconfigurations in Redlands
require a building permit. Permits are reviewed by the
City of Redlands Building & Safety Division.
City of Redlands permitting resources
Typical pallet racking permit submittal requirements
- Stamped racking layout plans showing aisles, exits, and clearances
- Rack elevations and maximum storage heights
- Anchoring and base plate details
- Structural calculations for seismic compliance
- Manufacturer specifications and load ratings
- Scope of work for new installation or reconfiguration
Fire department and high-pile storage review
Depending on storage height and commodity classification,
Redlands may require fire department and/or high-pile storage review.
This can affect rack height, sprinkler clearance, and aisle width,
making early coordination important.
How long does pallet rack permitting take in Redlands?
Permit timelines vary based on project size, storage height,
and plan-check workload. Submitting complete, engineering-backed
drawings helps reduce corrections and inspection delays.
Need help with pallet racking in Redlands?
Inland Empire racking projects benefit from experienced planning,
engineering, and permitting support: